Ready for any job you give it.
Efficiency and comfort are the stand-out features of Kubota’s R530 wheel loader, with a powerful engine, superior maneuverability and a spacious cab. Designed to get the job done faster and keep you working comfortably.
| Engine | V2607 |
| Emission Certification | Tier 4 Final |
| Output (SAE J1995 gross) | 51.0 (38) / 2400 |
| Output (SAE J1349 net) | 47.9 (35.7) / 2400 |
| Displacement (cu. in.) | 160 (2615) |
| Transmission Type | Hydrostatic transmission |
| Overall Length | 17’ 4” (5295) |
| Overall Height | 8’ 1” (2455) / 8’ 1” (2475) |
| Overall Width | 5’ 8” (1721) |
| Ground Clearance (in.) | 12.8” (325) |
| Auxiliary Hydraulics Flow Rate (GPM) | 14.2 (53.8) |
| Auxiliary Hydraulic Pressure (psi) | 2700 (18.6) |
| Standard Tire Size | 365/70R18 |
| Traveling Speed: High (mph) | 12.4 (20.0) |
| Traveling Speed: Low (mph) | 2.9 (4.6) |
| Traction Force (lbs.) | 6540 (29.1) |
| Front/Rear Axle Traction Lock | Diff-lock (both axles) |
| Articulation Angle (deg.) | 40 (each direction) |
| Angle of Rear Frame Oscillation (deg.) | ±8 |
| Loader Clearance Circle ft.in. (mm) | 25’ 4” (7720) |
| Turning Radius Track Circle ft.in. (mm) | 11’ 1” (3385) |
| Brakes (Service) | Enclosed wet disc |
| Tipping Load (Full Turn) | 5093 (2310)/5534 (2510) / 3968 (1800)/4288 (1945) |
| Tipping Load (Straight) | 6041 (2740)/6537 (2965) / 4674 (2120)/5037 (2285) |
| Rated Operating Capacity (ROC) | 2546 (1155)/2767 (1255) / 1984 (900)/2144 (972) |
| Standard Bucket Capacity (yd3) | 0.85 |
| Bucket Breakout Force (lbs.) | 7761 (34.5) |
| Lifting Capacity at Ground Level lbs. (kN) | 5646 (25.1) |
| Loader Raise / Lower Time (sec.) | 6.3 / 4.0 |
| Fuel Tank (gal.) | 18.5 (70) |
| Hydraulic System (gal.) | 14.5 (55) |
| Hydraulic Reservoir (gal.) | 10.3 (39) |
| Operating Weight lbs. (kg) | 9303 (4220) / 9799 (4445) |
| Hinge Pin Height | 10’7″ |
| Dump Height at Fully Raised Position | 8′ |
| Maximum Dump Angle | 44 degrees |
| Reach Fully Raised at Maximum Dump Angle | 2’9″ |
| Steering Angle | 40 degrees |
| Frame Oscillation Angle | 8 degrees |
Find the perfect equipment for your next project.
Reviews
There are no reviews yet.